Our "off the shelf" machine for small and mid-sized enterprises.
TimberMaster is a multi-functional automatic planer that offers all the ability of the BigMaster and SuperMaster, but at an entry level that meets many more budgets.
For production of:
- Building timbers, four-sided, chamfered.
- Log-house profiles
- Construction full wood (KVH)
- Laminated timber, glulam
- Groove and feather boards
- Profile boards
TimberMaster can also be delivered as a two-sided machine (see below).
Basic configuration is either 12 inch, 16 inch or 24 inch width in working inches.
TimberMaster can be expanded to multiple spindles for profiling, but the components making up the machine are of more universal specification, as would befit a standardized planer. Delivery cycles are therefore shorter.
-
Rex cutter heads with hydro locking, can be easily removed for knife changes. On the vertical units, profile tools can be used as an alternative. - The flying circle of the vertical heads can range from minimum ø160 mm, to maximum ø 200 mm. for a profile depth of maximum 20 mm. For special application we offer also 250 mm
- Rex planers always use the horizontal cutter heads only for calibration. This design assures perfect sizing and finish quality. In order to profile horizontally, Rex adds additional spindles such as 5th and 6th.
Standard TimberMaster models
1. Spindles below, above, right and left:
2. Spindles below, above, right and left, plus another one below:
3. Spindles below, above, right and left, plus a second spindle above:
4, Spindles below, above, right and left, plus a second spindle below and another above:
All 4 models can be equipped with upper chamfering aggregates for 4-sided chamfering.
Using an additional upper shaft, you will need another feeding device or a frame assist. In principle, if using the machine as a block board planer, you should include another feeding device.
The TIMBERMASTER can be built with other spindle specifications. Here are some examples:
More TimberMaster models
1) TIMBERMASTER TM 2/63-W
- with 2 working shafts, the starter machine
- The ideal 2-sided planer, with fixed table height for universal use
- This maturely constructed machine allows for expansion to an 8-spindle planer and moulding system
- Deliverable in the working width from 410 bis 630 mm (16" to 24") and planing height of 260 mm (optional 300 mm) (10" to 12")
- Double-sided precision bearings on working shafts and feed rollers
- Small, powerful and accurate: the price-effective machine with the REX technological advantage and high safety standard.
2) TIMBERMASTER TM 6/41-K
- 4 working shafts and all-round chamfering system
- The perfect 4-sided planer for small to mid-range production
- Whether solid timbers, boards, T+G, profiled logs or Glulam are produced, TIMBERMASTER will never quit
- Wet or dry timbers are no problem for the powerful feed system with 10 cardanically driven feed rollers
- Floating vertical shafts, as well as floating chamfer aggregates are standard
- Indestructible quality
3) TIMBERMASTER TM 7/41-K
- 5 working shafts and all-round chamfering system
- The universal 4-sided planer with high degree of flexibility
- Robust, maintenance-free cardanic drive system with step-less feed speeds from 5- 30 meters/minute (16-100 ft/min)
- Floating vertical shafts for optimal production yield
- The machine with automatic chamfering, and additional lower working shaft for profiling, splitting, or milling work. Of course, can be supplied with additional upper shaft as well, or even several more.
- Strong motors, multi-sectioned in-feed roller technology, computerized controllers and specialty tools makes this the all-round planer.
Elevation shafts, upper cutter head and pressure rollers
Upper horizontal cutter head 160 mm diameter, feed rollers in front
Left vertical cutter head, floating
Left vertical cutter head, with exit rollers
Rear view, cardanic drive system
TimberMaster 5-spindle machine.
